Sharp XL-UH2080H „ Aerial connection, „ Speaker connection, Supplied FM aerial, each other

„Aerial connection

Supplied FM aerial:

Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can be received.

Supplied AM loop aerial:

Connect the AM loop aerial to the AM and GND (Earth) terminals. Position the AM loop aerial for optimum reception. Place the AM loop aerial on a shelf, etc., or attach it to a stand or a wall with screws (not supplied).

Note:

Placing the aerial on the unit or near the AC power lead may cause noise pickup. Place the aerial away from the unit for better reception.

Installing the AM loop aerial:
< Assembling >	< Attaching to the wall >

Wall Screws (not supplied)

XL-UH2080H

„Speaker connection

Connect the black wire to the minus (–) terminal, and the red wire to the plus (+) terminal.

Red	Black	Use
Caution:
z Use speakers with an impedance of 4 ohms or more, as lower		for
impedance speakers can damage the unit.
z Do not mistake the right and the left
channels. The right speaker is the one on the		Preparation
right side when you face the unit.
z Do not let the bare speaker wires touch
each other.
z Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
z Do not stand or sit on the speakers. You may
be injured.	Incorrect

9