Remote control
Battery installation
1Open the battery cover.
2Insert the supplied batteries according to the direction indicated in the battery compartment.
When inserting or removing the batteries, push them towards the
battery terminals.
3Close the cover.
Precautions for battery use:
zReplace all old batteries with new ones at the same time.
zDo not mix old and new batteries.
zRemove the batteries if the unit will not be used for long periods of time. This will prevent potential damage due to battery leakage.
Caution:
zDo not use rechargeable batteries
zInstalling the batteries incorrectly may cause the unit to malfunction.
zBatteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Battery removal:
Open the battery cover and pull up the battery to take out.
Notes concerning use:
zReplace the batteries if the operating distance is reduced or if the operation becomes erratic. Purchase 2 “AA” size batteries
zPeriodically clean the transmitter on the remote control and the sensor on the unit with a soft cloth.
zExposing the sensor on the unit to strong light may interfere with operation. Change the lighting or the direction of the unit if this occurs.
zKeep the remote control away from moisture, heat, shock, and vibrations.
Test of the remote control
Check the remote control after checking all the connections (see pages 8 - 10).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below: Press the
Remote sensor
0.2 m - 6 m
(8" - 20’)
Preparation for Use
11
