Sharp XL-UH2080H „ Random play, „ Programmed play, disc, Playback, To random play all tracks

„Random play

The tracks on the disc can be played in random order automatically.

To random play all tracks:

Press and hold down PLAY MODE button on the remote control. Press the / button.

To cancel random play: Press the PLAY MODE button. “R” will disappear.

Notes:

zIf you press the button during random play, you can move to the track selected next by the random operation. On the other

hand, the button does not allow you to move to the previous track. The beginning of the track being played will be located.

zIn random play, the unit will select and play tracks automatically. (You cannot select the order of the tracks.)

Caution:

After performing repeat or random play, be sure to press the (CD ) button. Otherwise, the disc will play continuously.

XL-UH2080H

„Programmed play

You can choose up to 32 selections for playback in the order you like.

1 Whilst in the stop mode, press the MEMORY button on the remote control to enter the programming save mode.

							Playback
2	Press the direct search buttons
	on the remote control to select
	the desired track.
3				Selected track number			disc
	Press the MEMORY button to				or	button.
	You can also select a track by pressing the
	save the track number.						MP3/WMA
4	Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be
	programmed.
	If you make a mistake, the programmed tracks can be cleared
	by pressing the CLEAR/DIMMER button.
5	Press the	(CD	) button.				or
	The total number in memory will
	appear.						CD
6	Press the	/ button to start playback.

17