Sharp XL-UH2080H To remove USB memory device, Advanced USB playback, USB Memory Playback

XL-UH2080H

USB Memory Playback

To remove USB memory device

1Press the USB button to stop playback. Then press the USB button again and wait until “UNPLUG OK” is

displayed.

Always remove the USB memory device after “UNPLUG OK” appears on the display. Improper removal of the USB memory device may cause irregularities such as continuous appearance of “READING FILES”. Should this happen, turn off the unit and then turn it on again.

2Disconnect USB memory device from the USB terminal.

Notes:

zSHARP will not be held liable for the loss of data whilst the USB memory device is con- nected to the audio system.

zFiles compressed in MP3 and / or WMA format can be played back when connected to the USB terminal.

zThis USB memory’s format supports FAT 16 or FAT 32.

zSHARP cannot guarantee that all USB memory devices will work on this audio system.

zUSB cable is not recommended for use in this audio system to connect to USB memory device. Use of the USB cable will affect the performance of this audio system.

zThis USB memory cannot be operated via USB hub.

zThe USB terminal in this unit is not intended for a PC connection but is used for music streaming with a USB memory device.

zExternal HDD-storage cannot be played back via USB terminal.

zIf the data inside the USB memory is large, it may take longer time for the data to be read.

zThis product can play WMA and MP3 files. It will automatically detect the file type being played. If unplayable file is played on this product, “NO SUPPORT” is indicated and the file will be automatically skipped. This will take a few seconds. If abnormal indications appear on the display due to the unspecified file, turn off the unit and then turn it on again.

zThis product relates to USB mass storage devices and MP3 players.It may however face some irregularities due to various unforeseen reasons from some devices. Should this happen, turn off the unit and then turn it on again.

zThe USB port is intended for direct connection to a USB memory device without any cable.

Advanced USB playback

„Repeat play

Repeat play can play all tracks sequence continuously.

To repeat all tracks:

Press the PLAY MODE button.

Press the / button.

To cancel repeat play:

Press the PLAY MODE button again until “” will disappear.

„Random play

The tracks can be played in random order automatically.

To random play all tracks:

Press and hold down PLAY MODE button on the remote control. Press the / button.

PLAYMODE

To cancel random play: Press the PLAY MODE button. “R” will disappear.

Notes:

zIf you press the button during random play, you can move to the track selected next by the random operation. On the other

hand, the button does not allow you to move to the previous track. The beginning of the track being played will be located.

zIn random play, the unit will select and play tracks automatically. (You cannot select the order of the tracks.)

22