Quick Start
This section shows the basic operation (projector connecting with the computer). For details, see the page described below for each step.
Setup and Projection
In this section, connection of the projector and the computer is explained using one example.
3 |
8 |
6 |
4 |
5 |
STANDBY/ON button
INPUT buttons
ENTER button
Adjustment buttons (P/R/O/Q)
8STANDBY button
3 ON button
6 COMPUTER button
5 | KEYSTONE |
|
|
| button |
|
|
4 | Zoom ring | 4 | ENTER button |
4 | Focus ring | 5 | Adjustment buttons |
|
| ||
|
|
| (P/R/O/Q) |
4 | HEIGHT | 5 | KEYSTONE button |
| ADJUST lever |
|
|
1. Place the projector facing a wall or a screen | _P. 18 | ||
2.Connect the projector to the computer and plug the power cord into the AC socket of the projector
When connecting equipment other than a computer, see | |
pages 22 and 23. | _PP. 21, 24 |
3. Remove the lens cap and turn the projector on | |
On the projector | On the remote control |
| _P. 25 |
16
