Sharp XR-30X, XR-40X, XR-30S operation manual Connecting Pin Assignments, Gnd

Connecting Pin Assignments

COMPUTER/COMPONENT input and COMPUTER/COMPONENT output Terminals:mini D-sub 15 pin female connector

11 15

1 5

6 10

COMPUTER Input/Output		COMPONENT Input/Output
Pin No.	Signal	Pin No.	Signal
1.	Video input (red)	1.	PR (CR)
2.	Video input (green/sync on green)	2.	Y
3.	Video input (blue)	3.	PB (CB)
4.	Not connected	4.	Not connected
5.	Not connected	5.	Not connected
6.	Earth (red)	6.	Earth (PR)
7.	Earth (green/sync on green)	7.	Earth (Y)
8.	Earth (blue)	8.	Earth (PB)
9.	Not connected	9.	Not connected
10.	GND	10.	Not connected
11.	Not connected	11.	Not connected
12.	Bi-directional data	12.	Not connected
13.	Horizontal sync signal: TTL level	13.	Not connected
14.	Vertical sync signal: TTL level	14.	Not connected
15.	Data clock	15.	Not connected

DVI-D Terminal: 24 pin connector
					Pin No.		Signal		Pin No.	Signal
					1.		T.M.D.S data 2–		16.	Hot plug detection
					2.		T.M.D.S data 2+		17.	T.M.D.S data 0–
24		17			3.		T.M.D.S data 2 shield		18.	T.M.D.S data 0+
					4.		Not connected		19.	T.M.D.S data 0 shield
					5.		Not connected		20.	Not connected
					6.		DDC clock		21.	Not connected
					7.		DDC data		22.	T.M.D.S clock shield
					8.		Not connected		23.	T.M.D.S clock+
					9.		T.M.D.S data 1–		24.	T.M.D.S clock–
	8	1			10.		T.M.D.S data 1+
					11.		T.M.D.S data 1 shield
16		9
					12.		Not connected
					13.		Not connected
					14.		+5V power
					15.		Ground
RS-232C Terminal: mini DIN 9 pin female connector
8			Pin No.		Signal	Name		I/O	Reference
				1.					Not connected
9		7		2.	RD	Receive Data		Input	Connected to internal circuit
				3.	SD	Send Data		Output	Connected to internal circuit
				4.					Not connected
6			3	5.	SG	Signal Ground			Connected to internal circuit
				6.					Not connected
				7.	RS	Request to Send			Connected to CS in internal circuit
5		4		8.	CS	Clear to Send			Connected to RS in internal circuit
				9.					Not connected
2		1

Appendix

53