Sharp XR-32X quick start Resize Mode, Computer, Image Projection Continued, Press RESIZE

Image Projection (Continued)

Resize Mode

This function allows you to modify or customize the resize mode to enhance the input image. De- pending on the input signal, you can choose a desired image.

Press RESIZE.	RESIZE
• See page 43 for setting on menu screen.	button

COMPUTER

		Main resolution		NORMAL	FULL	DOT BY DOT	BORDER	STRETCH
		SVGA (800 x 600)				800 x 600
	XR-32X	XGA (1024 x 768)		1024 x 768			768 x 576	1024 x 576
		SXGA (1152 x 864)				1152 x 864
		1280 x 800		1024 x 640	1024 x 768	1280 x 800	922 x 576
		SVGA (800 x 600)
	XR-32S	XGA (1024 x 768)		800 x 600		1024 x 768	600 x 450	800 x 450
		SXGA (1152 x 864)				1152 x 864
		1280 x 800		800 x 500	800 x 600	1280 x 800	720 x 450
		Input signal			For 4:3 screen		For 16:9 screen
	Computer		Image type	NORMAL	FULL	DOT BY DOT	BORDER	STRETCH
	XR-32X	XR-32S
Resolution		Resolution
lower than		lower than
	XGA	SVGA
	XGA	SVGA			*2	*2	*1, *3	*1
		Resolution	4:3 aspect ratio
Resolution
higher than		higher
		than
	XGA
		SVGA
	SXGA (1280 ⋅ 1024)
			5:4 aspect ratio
	1280 ⋅ 720				*1		*2	*2
	1360 ⋅ 768		16:9 aspect ratio
	1366 ⋅ 768
	1280 ⋅ 768				*1		*1	*1
	1280 ⋅ 800		16:10 aspect ratio
	: Cutout area on which images cannot be projected
*1	: Area where the signals are off screen
	The Image Shift function can be used for these images.
*2 Same as NORMAL mode.
*3	For XR-30S model, you cannot select BORDER when the resolution (1280 x 1024, etc.) that the horizontal ratio is smaller than 4:3 aspect ratio is
	selected.

30