Sharp XR-32X Operating with the Remote Control, Displaying the Pointer, Using the Spot Function

Operating with the Remote Control

BREAK TIMER button

FREEZE button Displaying the Pointer

MAGNIFY buttons

POINTER button

SPOT button

Adjustment buttons

(P/R/O/Q)

EFFECT button PICTURE MODE button

ECO+QUIET button

AUTO SYNC button

Displaying and Setting the Break Timer

1 Press POINTER and press P/R/ O/Qon the remote control to move the pointer.

•Press EFFECT to change the pointer icon (5 types).

2 Press POINTER again.

• The pointer will disappear.

Using the Spot Function

1 Press SPOT and press P/R/O/Q on the remote control to move the spot area.

•Press EFFECT to change the spot area size (3 types).

1 Press BREAK TIMER.

•The timer starts to count down from 5 minutes.

On-screen display

Press P/R/O/Q to adjust the

2 length of the break time.

•Increases with P or Q

5 minutes s6 minutes s60 minutes

•Shortens with O or R

4 minutes s3 minutes s1 minute

•The break time can be set in units of one minute (up to 60 minutes).

Canceling the break timer display function

2 Press SPOT again.

• The spot area will disappear.

Switching the Eco+Quiet Mode

Press ECO+QUIET to switch the Eco+Quiet mode between on and off.

•When the Eco+Quiet Mode is set to “ON”, the sound of the cooling fan will turn down, the power consumption will decrease, and the lamp life will extend.

Press BREAK TIMER.

Note

•Break Timer does not function while the pro- jector is operating the “Auto Sync”, “FREEZE” or “AV MUTE” functions.

Note

•Refer to “Lamp Setting” on page 42 for de- tails of the Eco+Quiet mode.

32