Shaw M1055FR manual Programming TV/VCR Combo Control

DVD Code

Device Type:___________________

AUD Code

Device Type:___________________

CBL Code

Device Type:___________________

TV Code

Device Type:___________________

PROGRAMMING TV/VCR COMBO CONTROL

If you own a TV/VCR Combo, perform the following instructions to control this device:

1.Turn on your TV/VCR Combo and insert a video cassette.

2.On the remote control, press AUX once; it will blink once. Then press and hold SETUP until

the AUX key blinks twice.

3.Use the “Manufacturer’s Codes (Codes Des Fabricants)” starting on page 49 to locate the brand name and enter the first four-digit code for your TV/VCR Combo. If you perform this procedure correctly, the AUX key will blink twice.

NOTE: If the AUX key did not blink twice after enter- ing the codes last digit, repeat steps 2 through 3 and try entering the same code again.

If you’ve located a TV/VCR setup code that works for your TV/VCR Combo and a separate TV code is also listed, you’ll need to program this code into the remote control to access vol- ume control (see “Programming Device Con- trol” starting on page 8).

10