Shaw M1055FR manual Vérification DES Codes, Deleting a Single Learning Key

presses, the remote exits programming.

If more than 15 seconds pass between key

5.Repeat steps 2 through 4 for another device

and/or key or press and hold SETUP to exit programming.

Deleting a Single Learning Key

This process returns the key to its original programming for the mode you select. You can also delete learned programming by teaching a different function to the key (see “Programming a Learned Key” on page 13)

NOTE: If more than 15 seconds pass between key presses, the remote exits programming.

1.Press SETUP until the last-selected device key

blinks twice, then 9 7 6.

2.Press a device key once (i.e., AUX, DVD, AUD,

TV, or CBL).

3.Press the key containing the learned function to be deleted twice. The remote will blink twice.

4.Repeat steps 2 through 3 for another key or

press and hold SETUP to exit programming.

Deleting All Learned Keys in a Specific Mode NOTE:

1.	Press SETUP until the last-selected device key
	blinks twice, then 9 7 6.

2.	Press a device key twice (i.e., AUX, DVD, AUD,
	TV, or CBL) to clear all the learned keys for
	that mode. The LED blinks twice.

3.	Repeat step 2 for another device or press and
	hold SETUP to exit programming.

VÉRIFICATION DES CODES

Si vous avez programmé votre Atlas ENP 5 Appareils de Shaw télécommande universelle à l’aide de la procédure de recherche d’un code (section “Comment trouver le

37