Shaw M1055FR manual Deleting a Single Learning Key, TV, or CBL

14

presses, the remote exits programming.

If more than 15 seconds pass between key

blink rapidly, then turn off. Continue holding the key on the original remote until the Atlas Shaw DVR/PVR 5-Device Universal Remote Control’s LED blinks twice.

NOTE: If the LED displays one long blink, a learning error has occurred. Try repeating this step again until a successful capture occurs. If the function is still not captured, press and hold SETUP to exit programming and review the “Learning Precautions” on the previous page. If needed, also see “Troubleshooting” on page 21. After review, start programming again at step 1.

5.Repeat steps 2 through 4 for another device

and/or key or press and hold SETUP to exit programming.

Deleting a Single Learning Key

This process returns the key to its original programming for the mode you select. You can also delete learned programming by teaching a different function to the key (see “Programming a Learned Key” on page 13)

NOTE: If more than 15 seconds pass between key presses, the remote exits programming.

1.Press SETUP until the last-selected device key

blinks twice, then press 9 7 6.

2.Press a device key once (i.e., AUX, DVD, AUD,

TV, or CBL).

3.Press the key containing the learned function to be deleted twice. The remote will blink twice.

4.Repeat steps 2 through 3 for another key or

press and hold SETUP to exit programming.

Deleting All Learned Keys in a Specific Mode NOTE:

1.	Press SETUP until the last-selected device key
	blinks twice, then press 9 7 6.