Shaw M1055FR manual RE-ASSIGNING Device Keys, Write those settings

4.Press and hold SETUP until the CBL key blinks twice.

RE-ASSIGNING DEVICE KEYS

The Atlas Shaw DVR/PVR 5-Device Universal Remote Control can be set up to control a second device of an already-assigned type. For example, to have the unit control a TV, a Cable Converter, and two DVD players, re-assign the unused AUX key to operate the second DVD Player as follows:

NOTE:	AUX is preset at the factory to control an RCA
	VCR. Performing the steps below will over-
	write those settings.

1.On the remote control, press AUX once; it will

blink once. Then press and hold SETUP until the AUX key blinks twice.

2.Enter 9 9 2. The AUX key will blink twice.

3.Press DVD once, then press AUX once. The AUX

key will blink twice.

The AUX key is now ready to be programmed for your second DVD player. See “Programming Device Control” on page 8. To re-assign other device keys, repeat these and substitute the key sequence using the following chart:

NOTE: Only one device can be assigned to an unused device key at a time.

To Re-Assign	Perform Key Sequence
AUX as 2nd	AUX￿SETUP￿9￿9￿2￿AUD￿AUX
AUD key
AUX as 2nd	AUX￿SETUP￿9￿9￿2￿TV￿AUX
TV key
AUX as 2nd	AUX￿SETUP￿9￿9￿2￿CBL￿AUX
CBL key
AUX back to	AUX￿SETUP￿9￿9￿2￿AUX￿AUX
AUX

To re-assign another unused device key, substitute it for the AUX key above and then perform the sequence. For

20