Shaw M1055FR manual Programming a Learned Key

•Learned keys are mode-specific, so each one can store a unique function for each mode.

•Do not use the following keys for learning: Device Keys, SETUP, Record (•), Tune-In Keys.

•Learning capacity is approximately 16 to 25 keys, depending on the code being learned.

•Certain device functions are not learnable including multi-frequency types, some high frequency ones, and other unusual formats.

•For optimum learning, avoid high levels of ambient light such as natural sunlight or energy-efficient fluorescent lights.

NOTE: Please have your original remote controls handy before programming learning.

Programming a Learned Key

NOTE: If more than 15 seconds pass between key presses, the remote exits programming.

1.Press SETUP until the last-selected device key

blinks twice, then press 9 7 5.

NOTE: If the LED displays one long flash instead, either your batteries are low, or the Atlas Shaw DVR/PVR 5-Device Universal Remote Control has a memory fault. In either case, the remote will not learn a new key. See “Additional Infor- mation” on page 23.

2.Press a device key once (i.e., AUX, DVD, AUD, TV, or CBL) to assign a mode for learning, then

the key that will learn the new code.

3.Place the Atlas Shaw DVR/PVR 5-Device Universal Remote Control head-to-head (about 2" apart) from your original remote control. Also locate the key (on your original remote control) that you want the Atlas Shaw DVR/PVR 5-Device Universal Remote Control to learn.

2"

4.On the original remote, press and hold the key to be learned. The Atlas Shaw DVR/PVR 5- Device Universal Remote Control’s LED will

13