Sherwood R-903R manual Digital Audio Recording with MD Recorder

ENGLISH

3 Start recording on the VIDEO 1.

Start play on the AUX and the VIDEO 2

4 respectively.

•The audio signal from the AUX and the video signal from the VIDEO 2 will be dubbed and you can enjoy them on the TV set and from the speakers.

If you select AUX for hearing and VIDEO 1 for seeing, whenever you select AUX, the VIDEO 1 is selected automatically as video input source. So you are sure to be observe the order and doing of the above steps 1 and 2.

DIGITAL AUDIO RECORDING WITH MD RECORDER

•Only when the OPTICAL DIGITAL OUT of this receiver is connected to the OPTICAL DIGITAL IN of the MD recorder or CD recorder, you can enjoy high-quality sound of digital recording without converting the original signals. Refer to “ CONNECTING AUDIO COMPONENTS”/ “ CONNECTING VEDIO COMPONENTS”/“CONNECTING DIGITAL INs and OUT” on page 6~7 and the operating instructions of the MD recorder or CD recorder.

Notes:

•Digital recording is available for the digital audio program sources such as CDs, MDs, some DVDs, etc.

•In most DVDs as well as some CDs, etc., digital recording may not be available depending on the signal format.

•There are some restrictions on recording digital signals. When making digital recordings, refer to the operating instructions of your digital recording equipment to know what restrictions are imposed.

1	Select a desired input of AUX, VIDEO		2	For digital recording, select the desired
	1~3 as a recording source.			digital input as recording signal input.
					DIGITAL INPUT
					AM/FM MODE
INPUT SELECTOR		AUX	• Each time this button is pressed, the corresponding
		VIDEO1
			input is selected as follows:
	or	VIDEO2
		VIDEO3	A(nalog)		o(ptical) 1 o(ptical) 2 c(oaxial) 1

Note : When the selected digital input is not connected, “DIGITAL” indicator flickers. There will be no recording as well as no sound.

3	Start recording on the component	4	Start play on the desired input.
	connected to OPTICAL DIGITAL OUT.

36