Shindaiwa LE261/EVC, LE261 manual

ENGLISH

SHINDAIWA OWNER’S/OPERATOR’S MANUAL

LE261/EVC LAWN EDGER

Part Number 62721-94310 Rev. 11/06

Minimize the risk of injury to yourself and others!

Read this manual and familiarize yourself with the

contents. Always wear eye and hearing protection

when operating this unit.

WARNING!

LE261

Contents

Main ENGLISH SHINDAIWA OWNERS/OPERATORS MANUAL LE261/EVC LAWN EDGER Contents Introduction Work Safely Minimize the Risk of Fire! General Safety Instructions General Safety Instructions The Properly Equipped Operator Safety Labels Be Aware of the Working Environment 50 FEET Product Description Specications Prior to Assembly Driveshaft and Powerhead Connect the Outer Tube to the Powerhead. Throttle Linkage and Ignition Leads Refer to Figures 7 and 7a. Throttle Cable Free Play Adjustment Adjusting Free Play Handle Connect the Handle to the Outer Tube. Attachment Shield and Edger Blade Mount the Edger Blade. Mount the Cutting Attachment Shield on the Gearcase. The LE261 Edger should now be completely assembled. Minimize the Risk of Fire! Starting the Engine IGNITION SWITCH ON IGNITION SWITCH OFF Starting a Warm Engine. When the Engine Starts... Adjusting Engine Idle Idle Speed Adjustment Guidelines for Operating the Edger Checking Unit Condition Edging with an Hand-held Edger Adjusting the Blade Cutting Depth General Maintenance Edger Blades Mufer Spark Plug Daily Maintenance 10-Hour Maintenance 10/15-Hour Maintenance 50-Hour Maintenance Inspect the Gearcase Protector. Lubricate the Flexible Shaft. CATALYST MUFFLER 135-Hour Maintenance Long Term Storage Troubleshooting Guide what To Check Possible Cause Remedy ENGINE DOES NOT START LOW POWER OUTPUT Troubleshooting Guide (continued) ADDITIONAL PROBLEMS symptom Possible Cause Remedy Your Warranty Rights and Obligations Manufacturers Warranty Coverage Emission System Warranty Statement Owners Warranty Responsibilities Consequential Damages What is Not Covered This Warranty is Administered by: