Mixing Instructions

1.Fill an approved fuel container with half of the required amount of gasoline.

2.Add the proper amount of engine oil to gasoline.

3.Close container and shake to mix oil with gaso- line.

4.Add remaining gasoline, close fuel container, and remix.

IMPORTANT!

Spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic fuel shut-off containers to reduce fuel spillage.

After use

•DO NOT store a unit with fuel in its tank. Leaks can occur. Return unused fuel to an approved fuel stor- age container.

Storage - Fuel storage laws vary by locality. Contact your local government for the laws affecting your area. As a precaution, store fuel in an approved, airtight container. Store in a well-ventilated, unoccupied build- ing, away from sparks and flames.

IMPORTANT!

Stored fuel may separate. ALWAYS shake fuel container thoroughly before each use.

Filling the Fuel Tank

WARNING!

Minimize the Risk of Fire

■■NEVER smoke or light fires near the engine.

■■ALWAYS stop the engine and allow it to cool before refueling.

■■ALWAYS Wipe all spilled fuel and move at least 3 meters (10 feet) from the fueling point and source before starting.

■■NEVER place flammable material close to the engine muffler.

■■NEVER operate the engine without the muffler and spark arrester screen in place and in good working condition.

■■FUEL IS HIGHLY FLAMMABLE.

■■ALWAYS store gasoline in a container approved for flammable liquids.

■■ALWAYS inspect the unit for fuel leaks before each use. During each refill, check that no fuel leaks from around the fuel cap and/or fuel tank. If fuel leaks are evident, stop using the unit immediately. Fuel leaks must be repaired before using the unit.

■■ALWAYS move the unit at least 3 meters (10 feet) away from a fuel storage area or other readily flam- mable materials before starting the engine.

1.Place the unit on a flat, level surface.

2.Clear any dirt or other debris from around the fuel filler cap.

CAUTION!

Slowly remove the fuel cap only after stopping the engine.

3.Remove the fuel cap, and fill the tank with clean, fresh fuel.

4.Reinstall the fuel filler cap and tighten firmly.

5.Wipe away any spilled fuel before starting engine.

Starting the Engine

IMPORTANT!

Engine ignition is controlled by a two position switch mounted on the throttle housing labeled, “I” for ON or START and “O” for OFF or STOP.

NOTE:

The blade cover is used for transportation and storage. Remove blade cover before using the unit.

WARNING!

Never start the engine from the operating position.

10

Page 9 Page 11
Page 10
Image 10
Shindaiwa X7502801000, AH242es manual Filling the Fuel Tank, Starting the Engine, Mixing Instructions, After use
Page 9 Page 11

AH242es, AH242, X7502801000 specifications

The Shindaiwa AH242 and AH242es are advanced two-stroke, gasoline-powered hedge trimmers known for their power and efficiency. These models are designed for both professional landscapers and homeowners, featuring an ergonomic design that allows for extended use without fatigue. The AH242 is characterized by its lightweight construction, weighing only 11.5 lbs, making it easy to maneuver while trimming hedges and shrubs.

One of the standout features of the AH242 is its powerful 21.2cc engine, which delivers outstanding performance while maintaining low emissions. This is achieved through Shindaiwa's refined two-stroke technology, which not only enhances fuel efficiency but also reduces harmful exhaust fumes, contributing to a cleaner working environment. The AH242es version offers similar specifications but includes an Easy Start system, making it easier to start the machine with minimal effort, thus increasing user convenience.

Both models feature a double-sided cutting blade that measures 24 inches, providing an optimal cutting range and ensuring efficiency in trimming dense foliage. The design of the blade incorporates precision grinding technology, resulting in sharp edges that facilitate clean cuts and reduce the risk of plant damage. Moreover, the unique blade design minimizes vibration during operation, enhancing operator comfort and control.

The Shindaiwa AH242 and AH242es also boast an adjustable throttle control, allowing users to manage cutting speed according to the task at hand. This feature not only improves efficiency but also enhances safety by reducing the risk of accidental damage to surrounding plants. Additionally, the models incorporate a durable construction with high-quality materials, ensuring longevity and reliability in various weather conditions.

In terms of maintenance, both hedge trimmers are designed for easy accessibility to critical components, ensuring that servicing can be performed without hassle. The air filter can be easily accessed and cleaned, promoting engine longevity and optimal performance.

Overall, the Shindaiwa AH242, AH242es, and the associated model X7502801000 reflect a commitment to quality engineering, user comfort, and environmental responsibility. Whether for professional landscaping work or home gardening, these hedge trimmers provide powerful performance, innovative technology, and exceptional reliability, making them a top choice in the industry.
Top Page Image Contents