Safety (continued)
Safety Equipment and Labels
Hand guard
Ignition (STOP) switch
Throttle interlock
Cutter blade cover
IMPORTANT!
Caution, Danger, Warning, and Operation Information Labels: Make sure all informa- tion labels are undamaged and readable. Immediately replace damaged or missing information labels. New labels are available from your local authorized Shindaiwa dealer.
Operator Safety
Always wear a hard hat | This machine is designed | ALWAYS clear your work area |
to reduce the risk of head | for trimming hedges. Do | of trash or hidden debris that |
injuries during operation of | not use this machine for | could be thrown back at you or |
this machine. | other purposes. | toward a bystander. |
ALWAYS protect | Always wear eye and hearing protection. | |
Shindaiwa recommends wearing a | ||
yourself from hazards | face shield as additional face and eye | |
such as thorny brush |
| protection. |
and flying debris by |
|
|
wearing gloves and | Always operate with both hands | NEVER allow children to |
close fitting clothing | firmly gripping the machine. | use the unit. Avoid operating |
that covers arms and |
| near bystanders or when |
legs. Never wear | Keep a proper footing | children are nearby. |
shorts. Don't wear loose |
| |
clothing or items such | and do not overreach— | Keep bystanders at least |
as jewelry that could | maintain your balance | |
get caught in machinery | at all times during | 15 meters away from the |
or underbrush. Secure | operation. | operating trimmer to reduce |
long hair so it is above |
| the risk of being struck by |
shoulder level. | ALWAYS be aware of | falling objects or thrown |
| debris. | |
| your surroundings and |
|
| alert to any danger that |
|
you may not hear due to
machine noise.
Wear sturdy footwear with nonslip | ALWAYS wear | |
soles to provide good footing. | ||
clothing. Gloves offer added | ||
proctection and are strongly | ||
recommended. Never operate | ||
recommended. Do not wear | ||
machine | ||
clothing or jewelry that could | ||
| ||
| get caught in machinery. |
5