Maintenance (continued)
CAUTION!
Do not remove the
3.Slide the gearcase out of the tube. Using a grease gun, pump lithium- base grease (about 10 grams) into the grease fitting (B) on the gearcase until you see old grease being purged from the gearcase. Purged grease will be visible in the outer tube cavity.
4.Clean up excess grease, then reas- semble the gearcase onto the outer tube. Make sure the index bolt fits into the hole on the outer tube.
Securely tighten both bolts.
Lubricate cutter assembly and gearcase
B
Gearcase
grease fitting
17