MARK V – MOUNTED OVERARM PIN ROUTER

555970

lent size. Small workpieces can be very difficult to control during op- erations without appropriate holding and guiding devices.

•For overarm routing operations, the Table Insert must always be posi- tioned with the threaded brass starter pin hole to the left of the threaded Guide Pin hole or center hole (depending on which Insert you’re using.

3.Setting your final depth-of-cut . . . With the Depth Control Handle unscrewed about one-half turn, lower the router motor by rotating the Depth Control Handle counter-clockwise. Position your workpiece next to the bit and de- termine your final depth-off-cut. Tighten the Depth Control Handle to lock the motor in position, then screw the Depth Stop Rod downward until it contacts the Overarm casting. Tighten the wing nut to lock the Rod in position

WARNING

•Avoid taking deep cuts. Your depth- of-cut should typically be limited to no more than 1/4" for each pass when using bits up to 1/2" diameter in hardwoods.

•For single-pass dovetail bits, always cut a groove first, then cut the dove- tail profile in the groove.

•Limit your depth-of-cut to 3/8" for each pass when using bits up to 1/2" diameter in soft woods.

•When using bits over 1/2" in diam- eter, limit your depth-of-cut to half

the recommended depths for bits less than 1/2" diameter.

4.Adjusting the Guard . . . Lower the Guard so it clears the workpiece by 1/4", then tighten its wing nut securely.

WARNING

•Never rout without the Guard in place

•Always position the Guard about 1/4" to not more than 1/2" above the workpiece surface.

5.Making your cut . . . Loosen the Depth Control Handle, raise the motor and re- tighten the Handle. Set the workpiece in position on the Worktable.

Turn on the motor, loosen the Depth Control Handle and pull it forward to lower the router bit slowly into your workpiece until the approximate depth for the first pass is reached.

Tighten the depth control handle, then make your cut . . . ALWAYS moving the workpiece counter-clockwise, AGAINST the rotation of the Router Bit.

WARNING

ALWAYS move your workpiece AGAINST the direction of the rotat- ing router bit and NEVER WITH the rotation of the bit. Moving WITH the rotation of the bit is referred to as a “climb-cut”, which could cause the bit to grab the workpiece, resulting in per- sonal injury.

19

Page 18 Page 20
Page 19
Image 19
Shopsmith 555970 manual Mark V Mounted Overarm PIN Router
Page 18 Page 20

555970 specifications

The Shopsmith 555970 is a versatile woodworking tool that embodies the ideal solution for hobbyists and professional woodworkers alike. As a multi-function machine, it combines multiple woodworking capabilities into a singular unit, allowing users to seamlessly transition between various tasks with ease and efficiency.

One of the standout features of the Shopsmith 555970 is its ability to operate as a table saw, bandsaw, drill press, disc sander, and lathe—all in one compact design. This all-in-one functionality eliminates the need for multiple machines, saving both space in the workshop and the expense of purchasing separate tools.

The device is powered by a robust motor that delivers consistent performance, enabling users to tackle a variety of materials, from softwoods to hardwoods. This makes the Shopsmith 555970 an excellent choice for diverse projects, whether constructing furniture, crafting detailed woodwork, or completing home repairs. With adjustable speeds and settings, users can customize their experience according to the specific needs of their project.

One innovative technology integrated into the Shopsmith 555970 is its quick-change tooling system. This feature allows users to switch from one function to another in a matter of minutes. For example, converting from a table saw to a lathe does not require extensive setup; instead, it can be done easily, enhancing workflow and reducing downtime.

Additionally, the Shopsmith 555970 is equipped with a dual-tube design for rigidity and stability, which contributes to safer operation and improved accuracy during cutting and shaping tasks. Safety features such as blade guards and secure locking mechanisms have also been thoughtfully integrated into the design, prioritizing user safety without sacrificing performance.

The compact design of the Shopsmith 555970 makes it particularly appealing for home workshops with limited space. Its dimensions allow it to be stored easily when not in use, catering to those who appreciate functionality without compromising their available workspace.

In summary, the Shopsmith 555970 stands out in the woodworking market for its multifunctionality, powerful motor, user-friendly features, and compact design. Whether you are a professional woodworker or a passionate DIY enthusiast, this machine offers the versatility needed to bring creative woodworking ideas to life.
Top Page Image Contents