Step by Step
Making Calls – Basic Functions
14
Making Calls – Basic Functions

Answering Calls

Special default ring signaling is set for your telephone:
• When you receive an internal call, your telephone
rings once every four seconds (single-tone
sequence).
• When you receive an external call, your telephone
rings twice in rapid succession every four seconds
(dual-tone sequence).
• When you receive a call from the entrance tele-
phone, your telephone rings three times in rapid
succession every four seconds (triple-tone se-
quence).
• If a call is waiting, you hear a short tone (beep) every
six seconds.
The number or the name of the caller appears on the
display.

Answering a Call With the Handset

The telephone rings. The caller appears on the screen.
nLift the handset.
u or vRaise or lower the volume. Keep pressing the key until
the desired volume is set.

Answering a Call with the Speaker

(Speakerphone Mode)

The telephone rings. The caller appears on the screen.
Press the key. The LED lights up.
Speakerphone mode.
Your service personnel can adjust the ring ca-
dence for external and internal calls for you. In
other words, different ring cadences can be set
for different internal callers.
This function is not available with
optiPoint410 economy/economy plus.
Speaker