Siemens 2011 Tango External outgoing calls, Calling external subscribers, Dial

18.7.99 KAP06.FM5 Gigaset 2011 Tango: A30852-X1100-B301-2-7619

External outgoing calls

External outgoing calls

Calling external subscribers

Press the off-hook key. You will hear the dial tone.

c

Enter the desired call number on the dialling keypad. The

o

number you have entered is shown on the display, e.g.:

:

Extern 123456

INTPAUSE

You will hear the ring tone.

Dialing with call number checking (en-bloc dialing)

En-bloc dialing allows you to check the external call number entered before it is dialed and correct it, if neces- sary, using the X display key before the line is seized. (For instructions on how to edit the call number, "Input function" ➔ page 22).

The maximum length of call numbers that you can enter is 22 digits.

Enter the desired call number. The number you have en-

o

tered is shown on the display, e.g.:

:

123456_

uW

<WEITER> X W

You can correct the number entered using the enter func- tion.

Press the off-hook key within 30 seconds to seize the

cline. The call number is dialed. You will then hear the ring tone.

or

( means: browse using	x	Z	, confirm using u	OK	)
t

tDial

The call number is dialed.

You can also leave this additional menu without dialing by pressing the { display key.

10