Siemens 2011 Tango Procedure in the case of malfunctions, Symptom Cause Remedy, Volume

18.7.99 KAP18.FM5 Gigaset 2011 Tango: A30852-X1106-B307-2-7619

Notes on operation

Procedure in the case of malfunctions

Not every malfunction means that there is an actual de- fect in your telephone. In some situations you may save time and money if you can eliminate the cause of simple faults yourself. The information below will help you do this.

Symptom	Cause	Remedy
No display appears	Handset is not switched on.	Switch on the handset.
	Battery is empty.	Replace the battery with a backup
		battery or recharge it.
Cannot seize the dial-up line;	The plug on the power cord	Check the plug on the base station
no dial tone	is not connected properly.	and telephone socket; if necessary
		remove it and plug it back in
		(➔ page 1).
	The plug on the power cord	Check the plug on the base station
	is not connected properly.	and the socket; if necessary re-
		move it and plug it back in (➔ page
		1).
	The dial-up line is being used	Wait until the dial-up line is free.
	by another handset.
Cannot set up a radio link to	Handset is not registered.	Register the handset at the base
the base station- symbol on		station (➔ page 48).
the handset flashes.
	The plug on the AC power	Check the plug on the base station
	adapter cord is not connect-	and the socket; if necessary re-
	ed properly.	move it and plug it back in.
Base station or handset does	Ringer volume is set to low.	Adjust the base station (➔ page
not ring.		26) or handset (➔ page 29) ringer
		volume.
	The ring assignment is not	Adjust the ring assignment
	set correctly.	(➔ page 49).
No connection after dialing a	Wrong signaling method.	Reset the signaling method
call number; dial tone can		(➔ page 7).
still be heard.
With telephone systems:	Analog trunk/MSI not en-	Enter analog trunk/MSI (➔ page
no connection or wrong con-	tered	53).
nection after dialing from a
memory.

66