Siemens 3000 Setting the date and time, Determining direct call numbers, Fam G

Setting the handset

Step-by-Step

		©
DE		[
	Calendar/Clock
DE		[
	Date/Time
		o
		D
		o

D

Fam G

Save

Setting the date and time

We recommend setting the date and time to ensure the correct time/date is recorded for all calls. You can choose between 12-hour display (am, pm) and 24-hour display.

Note:

Do not switch off the handset after you have made the settings, otherwise the date and time will be reset.

Check the date and time and reset from time to time where applicable.

Open the menu.

Select and confirm the menu item.

Select and confirm the menu item.

Enter the date, e. g. 22.09.2002 = 220902.

Move the cursor down one line.

Enter the time, e. g. 19:05 = 1905.

Move the cursor down one line.

Define the display mode (am, pm).

Save the settings.

Determining direct call numbers

You must determine a direct call number to perform a direct call. The room monitor number is used as the di- rect call number. This number is then selected once you activate the direct call key (Æ page 8). The room moni- tor function must be deactivated for this.

Enter the direct call number via the room monitor func- tion (Æ page 77).

You can store a direct call number in the redial list by saving the number separately as "direct call" in your mo- bile telephone’s telephone directory.

Store the direct call number as "direct call" in your mo- bile telephone’s telephone directory (Æ page 31).

23