Local time setting, Sound mode | Topfield HV7700 HSCI manual

3.3 Local time setting 19

NOTE

You can enjoy only standard deﬁnition video with the follow- ing connectors:

•Composite video connector (VIDEO)

•SCART connector (TV)

3.2.5Sound mode

Basically, there are two audio sources as you can ﬁnd two au- dio sockets on the back panel of the digital receiver. You can enjoy only one source or both of them in either stereo or mono. Set the Sound Mode option as you desire.

Apart from this setting, you can change the sound mode with the button. See § 5.2.4 for detailed description.

The digital receiver can output two types of digital audio sig- nals via the S/PDIF connector. One is an encoded signal, and the other is a decoded signal. If your digital audio appliance does not have a Dolby Digital decoder, you have to set the Dolby Digital option to PCM. Otherwise, set it to Bitstream.

3.3Local time setting

You should set your local time for timer events. If you do not set the local time right, the programme time table provided by the programme guide may be distrustful. For the programme guide, refer to § 5.3.

Image 25

Topfield HV7700 HSCI manual Local time setting, Sound mode

Contents

TF 7700 Hsci Page Contents Service Search Index Page Introduction Features Front panel Controlling the digital receiver Controlling the digital receiver Remote control Dio services Button mutes the sound. Press again to switch itButton sets a sleep timer These buttons have different functions per menu. They To watch a pay service, you should take the following steps What is common interface? Safety precautions SetupPlease read the following safety precautions carefully Unpacking Setup TF 7700 Hsci has some connections on the back panel Rear panel connections Connecting the antenna Connecting up your digital receiver To use the Hdmi connector Connecting to your television To use the Scart connector To use the composite video connector Connecting to your video cassette recorder Inserting batteries in the remote control Language settings Preference Settings Colour model Video and audio settings Television aspect ratio Video cassette recorder High deﬁnition television Sound mode Local time setting Preference Settings Local time setting Time offset table City Parental control Adjusting the on-screen display Searching broadcasting services Service Search1 Conﬁguring LNB settings Searching broadcasting services 2 Conﬁguring DiSEqC 1.2 settings Searching broadcasting services 3 Conﬁguring Usals settings Searching services Service Search OK Editing the transponder list Resetting to installer settings Resetting to factory settings Service Search Daily Usage Volume controlWatching television Level Down Button skips over 10 entries up or When the highlight bar is on an entry of which initialButton performs an alphabetic browse. For Button puts the highlight bar on the ﬁrst Watching television Favourite services Favourite services listButton After you have Button. To Press Button continuously un Viewing programme informationReaches your desired level Viewing electronic programme guide Button, and adjust its transparency withSelecting audio tracks Selecting subtitle tracks Highlight bar on your choice with Button Press Button. To switch to Watching multifeed programme Making timer eventsYour desired satellite Making timer events Editing the services list Listing ServicesColumn and press the Vice to edit on Right column. To go over to the other col § 6.3 for how to use the on-screen keyboard Editing the favourite list Each column Transferring receiver data How to use on-screen keyboard Transferring receiver data Firmware Update From your computer via RS-232 port From a USB storage From another digital receiver via RS-232 port From another digital receiver via RS-232 port Index LNB OUT Usals Page Correct disposal of this product