Connecting to your video cassette recorder | Topfield HV7700 HSCI

2.4 Connecting up your digital receiver 13

To use the composite video connector

You will need to obtain a composite video cable (RCA cable) to use the composite video connector. Plug one end of the cable into the VIDEO (yellow) socket on the digital re- ceiver, and the other end into the matching socket on your television.

NOTE

You cannot view high deﬁnition video with the composite video connector.

To connect the audio connectors

You will need to obtain an audio cable (RCA cable) to connect the audio connectors. Plug one end of the cable into the AUDIO L (white) and AUDIO R (red) sockets on the digital receiver, and the other end into the matching sockets on your television or au- dio system.

To enjoy Dolby digital audio, your televi- sion or audio system must be able to decode Dolby digital audio, and you will need to ob- tain a S/PDIF cable. Plug one end of the ca- ble into the S/PIDF socket on the digital re- ceiver, and the other end into the matching socket on your audio system.

2.4.3 Connecting to your video cassette recorder

The digital receiver can also output video to another appliance such as a video cassette recorder or video receiver through an auxiliary SCART connector.

Image 19

Topfield HV7700 HSCI manual Connecting to your video cassette recorder, To use the composite video connector

Contents

TF 7700 Hsci Page Contents Service Search Index Page Introduction Features Front panel Controlling the digital receiver Controlling the digital receiver Remote control These buttons have different functions per menu. They Button mutes the sound. Press again to switch itDio services Button sets a sleep timer To watch a pay service, you should take the following steps What is common interface? Unpacking SetupSafety precautions Please read the following safety precautions carefully Setup TF 7700 Hsci has some connections on the back panel Rear panel connections Connecting the antenna Connecting up your digital receiver To use the Hdmi connector Connecting to your television To use the Scart connector To use the composite video connector Connecting to your video cassette recorder Inserting batteries in the remote control Language settings Preference Settings Colour model Video and audio settings Television aspect ratio Video cassette recorder High deﬁnition television Sound mode Local time setting Preference Settings Local time setting Time offset table City Parental control Adjusting the on-screen display Searching broadcasting services Service Search1 Conﬁguring LNB settings Searching broadcasting services 2 Conﬁguring DiSEqC 1.2 settings Searching broadcasting services 3 Conﬁguring Usals settings Searching services Service Search OK Editing the transponder list Resetting to installer settings Resetting to factory settings Service Search Level Volume controlDaily Usage Watching television Button puts the highlight bar on the ﬁrst When the highlight bar is on an entry of which initialDown Button skips over 10 entries up or Button performs an alphabetic browse. For Watching television Button. To Favourite services listFavourite services Button After you have Press Button continuously un Viewing programme informationReaches your desired level Selecting subtitle tracks Button, and adjust its transparency withViewing electronic programme guide Selecting audio tracks Highlight bar on your choice with Button Press Button. To switch to Watching multifeed programme Making timer eventsYour desired satellite Making timer events Vice to edit on Right column. To go over to the other col Listing ServicesEditing the services list Column and press the § 6.3 for how to use the on-screen keyboard Editing the favourite list Each column Transferring receiver data How to use on-screen keyboard Transferring receiver data Firmware Update From your computer via RS-232 port From a USB storage From another digital receiver via RS-232 port From another digital receiver via RS-232 port Index LNB OUT Usals Page Correct disposal of this product