Topfield HV7700 HSCI manual Service Search

30 Service Search

1.Choose your desired satellite at the Satellite Name op- tion.

2.Set the Search Mode option to Auto.

To search every service of a transponder, perform the follow- ing steps:

1.Choose your desired satellite at the Satellite Name op- tion.

2.Set the Search Mode option to Manual.

3.Choose your desired transponder at the Frequency op- tion or input it with the numeric buttons.

4.Input the symbol rate of your desired transponder to the Symbol Rate option with the numeric buttons.

5.Set the Polarization option to the polarization of your de- sired transponder.

6.Set the Modulation option to the modulation method of your desired transponder. If your desired transponder has high definition broadcasts, you should set this op- tion to DVB-S2 QPSK or DVB-S2 8PSK. Then the FEC option and the Pilot option will become enabled. You also should set these options correctly.

NOTE

You can get transponder information from a satellite magazine or web site such as http://www.satcodx.com or http://www. lyngsat.com.

To search one service of a transponder, perform the following steps:

1.Choose your desired satellite at the Satellite Name op- tion.

2.Set the Search Mode option to Advanced.