Topfield HV7700 HSCI specs

52 Firmware Update

To update the ﬁrmware with this method, perform the follow- ing steps:

1.Download a new ﬁrmware applicable to the digital receiver from the Topﬁeld web site.

2. Turn off the digital receiver.

3. Plug one end of a RS-232 cable (9 pin D- sub cable) into the RS-232 port on the digital receiver, and the other end into the matching port on your computer.

4.Run TFD-Down.

The instructions on how to use TFD-Down are as follows:

1.Press the Find button to select the new ﬁrmware ﬁle.

2.Press the Download button.

3.To start the ﬁle transfer, turn on the digital receiver.

4.When the ﬁle transfer is complete, the display panel on the digital receiver will count down to zero while the new ﬁrmware is being applied.

5.Restart the digital receiver.

7.3From another digital receiver via RS-232 port

It is possible to transfer a new ﬁrmware to the digital receiver from another same digital receiver by connecting them with a RS-232 cable.

To update the ﬁrmware with this method, perform the follow- ing steps:

Image 58

Topfield HV7700 HSCI manual From another digital receiver via RS-232 port

Contents

TF 7700 Hsci Page Contents Service Search Index Page Features Introduction Controlling the digital receiver Front panel Controlling the digital receiver Remote control Button sets a sleep timer Button mutes the sound. Press again to switch itDio services These buttons have different functions per menu. They What is common interface? To watch a pay service, you should take the following steps Please read the following safety precautions carefully SetupSafety precautions Unpacking Setup Rear panel connections TF 7700 Hsci has some connections on the back panel Connecting up your digital receiver Connecting the antenna Connecting to your television To use the Hdmi connector To use the Scart connector Connecting to your video cassette recorder To use the composite video connector Inserting batteries in the remote control Preference Settings Language settings Video and audio settings Colour model Video cassette recorder Television aspect ratio High deﬁnition television Local time setting Sound mode Preference Settings Local time setting Time offset table City Parental control Adjusting the on-screen display Searching broadcasting services Service Search1 Conﬁguring LNB settings Searching broadcasting services 2 Conﬁguring DiSEqC 1.2 settings Searching broadcasting services 3 Conﬁguring Usals settings Searching services Service Search OK Editing the transponder list Resetting to factory settings Resetting to installer settings Service Search Watching television Volume controlDaily Usage Level Button performs an alphabetic browse. For When the highlight bar is on an entry of which initialDown Button skips over 10 entries up or Button puts the highlight bar on the ﬁrst Watching television Button After you have Favourite services listFavourite services Button. To Press Button continuously un Viewing programme informationReaches your desired level Selecting audio tracks Button, and adjust its transparency withViewing electronic programme guide Selecting subtitle tracks Press Button. To switch to Highlight bar on your choice with Button Watching multifeed programme Making timer eventsYour desired satellite Making timer events Column and press the Listing ServicesEditing the services list Vice to edit on Right column. To go over to the other col § 6.3 for how to use the on-screen keyboard Editing the favourite list Each column How to use on-screen keyboard Transferring receiver data Transferring receiver data Firmware Update From a USB storage From your computer via RS-232 port From another digital receiver via RS-232 port From another digital receiver via RS-232 port Index LNB OUT Usals Page Correct disposal of this product