Topfield HV7700 HSCI manual Transferring receiver data

6.4 Transferring receiver data 49

1.Plug one end of a RS-232 cable (9 pin D- sub cable) into the RS-232 port on the digital receiver, and the other end into the matching port on the other digital re-

ceiver.

2. turn on the source digital receiver.

3. Select the Installation > Transfer Firmware

> Transfer Data to Other IRD menu.

4.To start the data transfer, turn on the tar- get digital receiver.

NOTE

You had better memorize some important data such as video settings before starting transfer to avoid loosing them.