Controlling the digital receiver | Topfield HV7700 HSCI specs

2 Introduction

•Can store up to 5000 television and radio services.

•You can edit the services list.

•You can make a favourite list with your favourite ser- vices.

•You can view information about the current television or radio programme.

•Has an electronic programme guide that provides an overview of programme schedules for next few hours.

•You can update the ﬁrmware of the digital receiver to the latest version, which will be provided by the manu- facturer.

1.2Controlling the digital receiver

The digital receiver can be operated with the remote control and the buttons on the front panel.

NOTE

When the digital receiver is off but plugged into a wall outlet, we say that it is in standby mode; on the other hand, when it is on, it is in operation mode. Even when you are not using the digital receiver, you should keep it plugged into a wall outlet to be in standby mode so that it can run timer events at any time.

1.2.1 The front panel

The front panel of the digital receiver has buttons to control the digital receiver, and speciﬁc lamps and a display to indi- cate its status. The following indicates what they mean.

Image 8

Topfield HV7700 HSCI manual Controlling the digital receiver, Front panel

Contents

TF 7700 Hsci Page Contents Service Search Index Page Features Introduction Controlling the digital receiver Front panel Controlling the digital receiver Remote control Button mutes the sound. Press again to switch it Dio servicesButton sets a sleep timer These buttons have different functions per menu. They What is common interface? To watch a pay service, you should take the following steps Setup Safety precautionsPlease read the following safety precautions carefully Unpacking Setup Rear panel connections TF 7700 Hsci has some connections on the back panel Connecting up your digital receiver Connecting the antenna Connecting to your television To use the Hdmi connector To use the Scart connector Connecting to your video cassette recorder To use the composite video connector Inserting batteries in the remote control Preference Settings Language settings Video and audio settings Colour model Video cassette recorder Television aspect ratio High deﬁnition television Local time setting Sound mode Preference Settings Local time setting Time offset table City Parental control Adjusting the on-screen display 1 Conﬁguring LNB settings Service SearchSearching broadcasting services Searching broadcasting services 2 Conﬁguring DiSEqC 1.2 settings Searching broadcasting services 3 Conﬁguring Usals settings Searching services Service Search OK Editing the transponder list Resetting to factory settings Resetting to installer settings Service Search Volume control Daily UsageWatching television Level When the highlight bar is on an entry of which initial Down Button skips over 10 entries up orButton performs an alphabetic browse. For Button puts the highlight bar on the ﬁrst Watching television Favourite services list Favourite servicesButton After you have Button. To Reaches your desired level Viewing programme informationPress Button continuously un Button, and adjust its transparency with Viewing electronic programme guideSelecting audio tracks Selecting subtitle tracks Press Button. To switch to Highlight bar on your choice with Button Your desired satellite Making timer eventsWatching multifeed programme Making timer events Listing Services Editing the services listColumn and press the Vice to edit on Right column. To go over to the other col § 6.3 for how to use the on-screen keyboard Editing the favourite list Each column How to use on-screen keyboard Transferring receiver data Transferring receiver data Firmware Update From a USB storage From your computer via RS-232 port From another digital receiver via RS-232 port From another digital receiver via RS-232 port Index LNB OUT Usals Page Correct disposal of this product