Router User’s Guide | Monitoring Network Health |
Time Client
An accurate log timestamp is one of the requirements of the ICSA Labs firewall criteria (ver 3.0a). In order to maintain accurate timestamps in each log message, the firewall implements a Simple Network Time Protocol (SNTP) client. This allows the system to automatically synchronize its date and time with Coordinated Universal, the international time standard. The system date and time are set and corrected automatically via the designated server(s).
To configure the time client:
1.Select Setup>Time Client from the left navigation pane of the Web interface. This displays the “Time Client Configuration” window.
2.Select Enable from Enable Time Client.
3.In Primary Server IP Address, enter the IP address of the primary server to use as the time server (a
4.In Secondary Server IP Address enter the IP address of the secondary server to use as the time server if the router does not receive a response from the primary server.
5.In Select Time Zone, enter the time zone in minutes from UTC.
6.Click Apply.
40