Getting Started | 9 |
Charge battery
The battery is not fully charged when delivered. Plug in the charger cable at the bottom of the phone, plug in the power supply unit to the mains power socket and charge for at least two hours.
| 3 | no | |
|
| ||
c |
| m |
|
| 6 | z | |
ab |
|
| xy |
2 | l |
| w |
5 | jk |
| 9 |
| v |
| |
i |
| tu |
|
4gh |
| 8 |
|
qrs |
| 0 |
|
7p |
|
|
|
hDisplay when charging is in progress
Charging timeAn empty battery is fully charged after about 2 hours. Charging is only possible in an ambient temperature of 5 °C to 40 °C (the charge icon flashes as a warning when the temperature is 5 °C above/below this range). The voltage specified on the power supply unit must not be ex- ceeded.
To use the full performance of the battery, the battery must be fully charged and discharged at least five times.
If the battery is totally discharged no charge icon is displayed when the charger is plugged in. It is displayed after 2 hours at most. In this case the battery is fully charged after
Only use the charger provided!
Display while in serviceCharge level display during opera-
tion
A beep sounds when the battery is nearly empty. The charge level of the battery is displayed correctly only after uninterrupted charging/dis- charging. You should not remove the battery unnecessarily and if possible not end charging prematurely.
Note |
|
The charger heats up when used for long | |
periods. This is normal and not dangerous. | |
Operating times................................. | |
Quality declaration for the battery..... |