58

Notes A-Z

Control codes (DTMF)

Send control code

You can enter control codes (digits) during a call so that an answering machine can be controlled remotely. These digits are directly transmitted as DTMF tones (control codes). The sounds can also be heard when the microphone is switched off.

ymenu§ Open call menu.

Send DTMF tones

Select.

Use the Phonebook

Store phone numbers and control codes ( DTMF tones) in the Phone- book like a normal entry.

JEnter phone number.

0

Press until a "+" appears

 

on the display (pause for

J

connection setup).

Enter DTMF signals

(digits).

0If necessary enter further pauses of three seconds

 

each to ensure correct

 

processing at the destina-

J

tion.

Enter a name.

 

§Save§

Press.

You can also store the DTMF tones (digits) without a phone number and send them during a call.

EMS

(Enhanced Messaging Service)

Besides (formatted) texts, you can also send

•pictures (bitmaps),

•sounds,

•animations (sequence of 4 pictures)

using the EMS.

The segments specified above can be together or transmitted individually in an SMS. With EMS, pictures and sounds can also be sent (e.g. as screensavers and ringtones). This can cause messages that exceed the length of a single SMS. In this case a single message is made up of a number of concatenated SMS messages.