Status unknown (e.g. new SIM card).
Clear all
All barrings are cleared. A password which the service provider will give you is necessary for this function.
Phone identity
§Menu§KSetupKSecurity KSelect a function.
The phone ID (IMEI) is displayed. This information may be useful for cus- tomer service.
Barring not set.
Barring set.
The following information can be
displayed after a status check:
p o
§Menu§KSetupKSecurityKBarrings KSelect a function.
Outgo internat. x home barred
International calls are not permitted. However you can make calls to your home country when abroad.
All incoming calls
The phone is barred for all incoming calls (the forwarding of all calls to the mailbox offers a similar effect).
When roaming
You do not receive calls when you are outside your home network. This means that no charges are incurred for incoming calls.
Status check
Setup51
Alternatively enter in standby mode:
*# 0 6 #
Master reset
The phone is reset to the default values (factory setting) (does not apply to SIM card and network ^kt- settings).
Alternative input in standby mode:
*# 9 9 9 9 # A
Network
§Menu§KSetupKNetwork KSelect a function.
LineL
This function is only displayed if it is supported by the service provider. Two independent phone numbers must be registered on the phone.
Select
Select the currently used phone number.
Display the current phone number.
Note |
|
Settings for phone numbers .............. |
Lock line
(Phone code protected)
You may limit usage to one phone number.