Siemens C61 Making a phone call, End call, Set volume, Redial previous numbers, Sendcontrol code (DTMF), Dialing with number keys

Dial number (always with area code, if necessary with international dialing code).

§Clear§ A short press clears the last digit, a long press clears the entire phone number.

Press the Call key. The phone number displayed is dialed.

24 Making a phone call

Making a phone call

Dialing with number keys

The phone must be switched on

(standby mode).

J

A

End call

BPress the End key briefly. The call is ended. Press this key even if the person on the other end of the line has hung up first.

Set volume

EUse the control key (top) to start adjusting the vol-

Gume during conversation. Set volume and confirm with §OK§.

If a Car Kit is used, its volume setting will not affect the usual setting on the phone.

Redial previous numbers

To redial the phone number last

APress the Call key twice.called:

To redial other numbers that were
dialed previously:
A	Press the Call key once.
G	Pick out the required
	phone number from the
A	list, then press ...
	Press ...

Sendcontrol code (DTMF)

You can, for example, enter control codes (numbers) for remote access to an automatic answering machine while another connection exists.

These entries are transmitted directly as DTMF codes (control codes).

y menu§ Open the call menu.

Send DTMF

Select.