Setup 71

§Menu§ ¢m ¢Call Setup

¢Select a function.

Headset

Only in conjunction with an original Siemens headset (p. 95). If an original Siemens Headset is used the profile is automatically activated when the headset is plugged in.

Auto Answer

(factory default: off)

Calls are accepted automatically after a few seconds (except where the ringer is switched off or set to beep). You should therefore be wearing the headset. Eavesdropping is possible!

Automatic setting

Accept call with the Call key or PTT key (Push To Talk) when the key lock is activated.

Auto answer

If you do not notice that you phone has accepted a call, there is the danger that the caller may eavesdrop.

Call Forward

§Menu§ ¢m ¢Call Forward ¢Select a function.

You can set the conditions for which calls are forwarded to your mailbox or other numbers.

Set up call forwarding (example):

The most common condition for call forwarding is, for example:

All Calls

b

nSymbol in the top line

of the display in standby mode.Other calls are forwarded.

Unansweredb

GSelect Unanswered. (Includes the conditions

Not Reachable, No Reply,

Busy see below)

§Select§ Press.

Set Select.

JEnter the phone number to which the caller will be forwarded (if not already done)

Or

·Select this phone number

from the Phonebook or via §Mailbox§.

§OK§ Confirm. After a short pause, the setting is confirmed by the network.