Getting started | 9 |
Charging the battery
The battery is not supplied fully charged. Plug the charger cable into the bottom of the phone, plug the power supply unit into the mains power socket and charge for at least 3,5 hours.
Display when charging is in progress
hDuring charging.
Charging time
An empty battery is fully charged after about 3,5 hours. Charging is only possible within the temperature range of +0 °C to +45 °C. If the temperature rises/falls above/below this, the charge symbol flashes a war- ning. The voltage specified on the power supply unit must not be ex- ceeded.
To obtain maximum performance of the battery it must be fully charged and then emptied at least five times.
Charge icon not visible
If the battery was completely dis- charged, the charging symbol will not be immediately visible when connected to the charger. In this case the battery is fully charged after
Only use the charger provided!
Display while in service
Charge level display during opera-
tion
a d g
A beep sounds when the battery is nearly empty. The charge level of the battery is displayed correctly only after uninterrupted charging/discharg- ing. You should therefore not remove the battery unnecessarily and where possible not interrupt charging prema- turely.
Note
The charger will become hot after extended use. This is normal and not dangerous.
Performance
A full battery will give you between