Security13
Codes
The phone and the SIM card are protected against misuse by several security codes.
Keep these confidential numbers in a safe place where you can access them again if required.
§Menu§¢m¢Security¢Codes ¢Select function.
PIN control
The PIN is usually requested each time the phone is switched on. You can deactivate this feature but you risk unauthorised use of the phone. Some service providers do not permit deactivating the control.
§Select§ Press.
JEnter PIN.
§OK§ Confirm input. §Change§ Press.
§OK§ Confirm.
Change PIN
You can change the PIN to any
JEnter current PIN.
§OK§ Press.
J, §OK§ Enter new PIN.
J, §OK§ Repeat new PIN.
Change PIN2
(display only if PIN 2 is available). Proceed as with Change PIN.
Chg.phonecode
The preset phonecode is 0000 for all phonecode protected functions. You are able to change it:
JEnter current phonecode.
§OK§ Press.
J, §OK§ Enter new phonecode
J, §OK§ Repeat new phonecode.
Clear SIM-card barring
If the PIN is entered incorrectly three times, the SIM card is barred. Enter the PUK (MASTER PIN), provided by your service provider with the SIM card, according to instructions. If the PUK (MASTER PIN) has been lost, please contact your service provider.
Prevent accidental activation
Even if PIN entry is deactivated, confirmation is required to switch on the phone. This prevents the phone from being switched on accidentally, e.g. when you are carrying it in a bag.
BHold down.
§OK§ | Press. The phone switches |
| on. |