Siemens C62 Insert SIM card/battery

8 Getting started

Insert SIM card/battery

The service provider supplies you with a SIM card on which all the important data for your account is stored. If the SIM card is in credit- card size, snap out the smaller segment and remove any rough edges.

•Remove the battery cover by pressing top centre of the cover and slide downwards.

•Insert the SIM card into the slot with the contact area facing down- wards and push gently until it en- gages below the holder (make sure the angled corner is in the correct position).

•Place the battery into the block of the phone, with the contact area facing down. Push the battery carefully downwards.

•Slide the battery cover upwards from the bottom of the phone, un- til it latches into place.

Note

Always switch off phone before removing the battery!

Only 3 V SIM cards are supported. Please contact your service provider, if you have an older card.