Commissioning the SIMATIC Box PC 620
2-9
SIMATIC Box PC 620 Operating Manual
C79000-Z7076-C638-04
Connecting and Switching on the SIMATIC Box PC 620
Before you connect the SIMATIC Box PC 620 to the mains, the keyboard, mouse
and display or monitor must be connected.
1. Insert the connector cable of these peripheral units into the corresponding
sockets on the port side of the SIMATIC Box PC 620 (see Section 3.1.)
2. Once the peripheral units have been connected, the device is ready for
operation from the power supply. Connect the device to the mains. The
SIMATIC Box PC 620 is now in service.
PS/2 mouse Device socket for non-heating appliances with
AC supply or terminal screw with DC supply
Keyboard VGA port for monitor
Figure 2-7 Connecting and Switching on the SIMATIC Box PC 620
Switching off the SIMATIC Box PC 620
The SIMATIC Box PC 620 has no mains switch and is switched off after only
disconnection from the mains.