Siemens C79000 Z7076 C638 04 Important Information

1-1

SIMATIC Box PC 620 Operating Manual

C79000-Z7076-C638-04

Important Information

1.1 Safety Instructions

!Caution

The safety instructions given on the reverse of the title page of this manual must

be observed. Before adding to the SIMATIC Box PC 620’s functionality by

expanding the hardware configuration (see Section 4.1) refer to the electronic

manual on the Backup CD supplied with your SIMATIC Box PC 620 and observe

the relevant safety instructions.

This device corresponds to the relevant safety measures according to IEC, EN,

VDE, UL, and CSA. If you have questions about the permissibility of the installation

in the designated environment, please contact our service representative.

Installation

Condensation can occur if the device is transported from a cold environment into

the operating area. The device must be dry prior to startup. You must allow for an

acclimatization time of at least four hours.

Please observe the notes on ambient conditions in Chapter 7 Technical

Specifications and the installation notes in Section 2.2 of this manual when

installing and operating the device. The device is to be installed so that there is no

danger of it falling or of causing damage to itself or others.

Be sure the fan ventilation slots are open so that a sufficient amount of air can be

drawn in to cool the housing interior.

!Warning

Take not of the permissible fitting positions without fail when installing the systems

(see Section 2.2).

If the systems are installed in a non-permissible fitting position, the approvals

pursuant to UL 1950 and EN60950 are no longer valid!

1

Contents

Main ! Siemens Aktiengesellschaft Contents Page Welcome to your SIMATIC Box PC 620 Features Quality Range of Application Fitting Option Functions Further Areas of Application: Consignment/Assessories Information about this Manual Using the Manual Conventions Other Documentation for the SIMATIC Box PC 620 Important Information 1.1 Safety Instructions Installation Power Connection Country-Specific Information Repairs Battery ! Notes on Inserting and Removing Modules 1.2 Certificates, Directives and Declarations Notes on the CE Symbol EMC Directive Low Voltage Directive Declaration of Conformity Observing the Setup Guidelines 1.3 Certification for the USA, Canada and Autralia Security Page Page Commissioning the SIMATIC Box PC 620 2.1 Unpacking and Checking the Scope of Delivery Unpacking the Recording the Serial Number Enter the Microsoft Windows Product Key from the Certificate of Authenticity 2.2 Installing the SIMATIC Box PC 620 Instructions for wall and ceiling mounting Commissioning the SIMATIC Box PC 620 C79000-Z7076-C638-04 2-4 Page Page Commissioning the SIMATIC Box PC 620 2-7 SIMATIC Box PC 620 Operating Manual C79000-Z7076-C638-04 Permissible Fitting Positions of the PC with Floppy Disk Drive Figure 2-6 Permissible Fitting Positions of the PC with LS120 An inclined position of + 20_ is allowed in each of the permissible fitting positions. Figure 2-5 Permissible Fitting Positions of the PC with Floppy Disk Drive Permissible Fitting Positions of the PC with LS120 2.3 Preparing for Operation Connection to the Power Supply Unit Equipotential Measures Switching off the SIMATIC Box PC 620 2.4 Transport Page 3.1 Right-Hand Side of the Device (Port Side) Page 3.2 Left-Hand Side of the Device (Drive Side) Reset Button 3.3 Ports Front Ports VGA Port Connecting USB Devices Page 3.4 PC Card Port Installing PC Cards 3.5 Drives 3.5.1 Disk Drive (Depending on the Device Configuration) Types of Diskette Handling Diskettes with the Floppy Disk Drive 3.5.2 LS120-Drive (Depending on the Device Configuration) Handling Disks with the LS120-Drive Information on the LS120-disk drive Restrictions Settings in Setup Usage notes for LS 120 Superdisks Recommended Superdisks: 3.5.3 Hard Disk Drive 3.5.4 CD-ROM Drive (depending on the device equipment) Opening the Drawer Inserting / Removing CDs Closing the Drawer CD-ROM Front Emergency Eject 3.6 Backup Battery Page Connection of System Expansions and External Devices 4.1 Connecting Peripheral Devices Page Page 5.1 Preparing for Start Up Powering Up the SIMATIC Box PC 620 5.2 Initial Start of the SIMATIC Box PC 620 Installing the Operating System Startup under Windows 98 Startup under Windows NT Startup under Windows 2000 5.3 Complete Restart of the SIMATIC Box PC 620 5.4 Electronic Manuals The Adobe Acrobat Reader Reading the manuals Error Diagnosis and Reinstallation Chapter Overview 6.1 Problems When Using Modules from Other Manufacturers Error Display Cause Remedy 6.2 The Monitor Remains Dark 6.3 The Screen Display Does not Appear or Drifts 6.4 No Mouse Pointer Appears on the Screen 6.5 The Clock Time and/or the Date in Your PC Is Incorrect Remedy 6.6 An Error Message Appears on the Screen Error Messages 6-6 6.7 No Connection via COM1/TTY Possible 6.8 Diagnostic Messages (Port 80) 6-8 The POST codes in order of occurrence: 6-9 6-10 6.9 Restoring the Hard Disk 6.9.1 Creating Partitions unter Microsoft Windows 98 Primary Partition Creating an Extended Partition 6.9.2 Creating Partitions unter Microsoft Windows 2000 Creating an Extended FAT 32 Partition 6.9.3 Creating Partitions under Windows NT Primary Partition 6.10 Installation of the Windows Operating System 6.10.1 Installing the Microsoft Windows NT Operating System Windows NT Installation Sequence 6.10.2 Installing the Microsoft Windows 98 Operating System Windows 98 Installation Sequence 6.10.3 Installing the Recovery CD for Microsoft Windows 2000 Windows 2000 Installation Sequence Setting the Language Selection for Windows 2000 6.11 Installing Drivers and Software Page 7-2 7.1 Technical Specifications of the SIMATIC Box PC 620 7-3 7-4 8-1 Hotline Services 8.1 Customer Support, Technical Support Open round the clock, worldwide: 8.2 SIMATIC Customer Support Online Services Further Support SIMATIC Documentation on the Internet Service & Support on the Internet Hotline Services 8.3 Regional Repair Centers Hotline Services 8-4