The screen picture is not displayed in certain situations, e.g. during a call or when the handset has been deregistered.
If a screen picture has been activated, the
menu item Screen Picture is marked with ‰ .
v¢Ð¢Display ¢Screen Picture
The current setting is displayed.
¤Change multiple line input:
Activation:
Select On (screen picture is displayed) or Off (no screen picture).
Selection:
Change screen picture if necessary (see below).
¤ Save changes (page 21).
If the screen picture conceals the display, press the end call key briefly to show the idle display with time and date.
Changing the screen picture
v¢Ð¢Display ¢Screen Picture
sScroll to the Selection line.
View§ | Press the display key. The |
| active screen picture is dis- |
| played |
s | Select picture/Clock and |
press §OK§.
¤ Save changes.
Setting display illumination
Depending on whether or not the handset is in the charging cradle you can set different levels of display illumination. If the charging cradle is switched on, the display is permanently dimmed.
v¢Ð¢Display ¢Backlight
Handset settings
The current setting is displayed.
¤Change multiple line input:
In Charger
Select On or Off .
without Charger Select On or Off .
§Save§ Press the display key.
aPress and hold (idle status).
Activating/deactivating auto answer
If you have activated this function, when you get a call you can simply lift the handset out of the charging cradle without having to press the talk key c.
v¢Ð¢Handset
Auto Answer
Select and press §OK§ ( ‰ = on).
aPress and hold (idle status).
Adjusting the loudspeaker volume
You can set the loudspeaker volume for handsfree speaking to five different levels and the earpiece volume to three different levels. You can only make these adjustments during an external call.
The handsfree volume can only be adjusted when this function is set.
You are conducting an external call.
tOpen menu.
rSelect volume.
§Save§ Press display key if necessary to save the setting perma- nently.
If tis assigned a different function:
§Options§ Open menu.
Volume Select and press §OK§. Configure setting (see above).
15