Closing the battery cover
¤Hold the battery cover at a slight angle and introduce the two lower lugs into the casing first. Then close the cover so that it clicks into place.
Locking the battery cover
Insert the catches on the lock ring or belt clip into the notches in the casing and make sure that the arrow markings on the casing are aligned with those on the bottom of the ring. Turn the lock ring or belt clip clockwise to the end stop. When both holes are horizontally aligned with the upper edge of the handset the lock ring is closed.
Safety precautions
Opening the battery cover
Position both thumbs on the lock ring and at the same time turn the lock ring or belt clip anticlockwise and remove.
¤Insert a coin into the cavity at the top of the battery cover and twist it until the cover opens.
Registering your phone
Before you can use your Gigaset E45 you must register it to a base station. It can be registered to a maximum of four base sta- tions. The actual registration procedure will depend on the type of base station.
Automatic registration Gigaset E45 to Gigaset E450
Important: The handset must not already be registered to any base station.
Registering the handset to the Gigaset E450 base station occurs automatically. (On the E455 base station you register your handset manually, see page 6.)
¤Place the handset in the base with its display facing forward.
Registration takes around 1 minute. During this process, Regstr.Procedure appears in the display and the name of the base station flashes e.g. Base 1. When the handset has registered, its screen displays its internal number, e.g. INT 2 for internal number 2. The handset is assigned the lowest available internal number
5