uThe battery pack may warm up as it is charging. This is not dangerous.
uAfter a time the charge capacity of the battery pack will decrease for technical reasons.
Setting the date and time
If you have not yet set the date and time, press the display key §Time§ to open the input field.
To change the time, open the input field via:
v¢Ð¢Date/Time
¤Change multiple line input:
Date:
Enter day, month and year in
Time:
Enter hours and minutes with 4 digits, e.g. QM15for 07:15 a.m.
§Save§ Press the display key.
Changing the base station
If your handset is registered to more than one base station, you can set it to a particular base station or to the base station that has the best reception (Best Base).
v¢Ð¢Handset ¢Select Base
sSelect one of the registered base stations or Best Base and press §OK§.
Making calls
Making an external call
External calls are calls using the public telephone network.
~c Enter the number and press the talk key.
Or:
Making calls
c~ Press and hold the talk key cand then enter the number.
You can cancel the dialling operation with the end call key a.
You are shown the duration of the call while the call is in progress.
Notes:
–Dialling using the directory,
Ending a call
aPress the end call key.
Answering a call
The handset indicates an incoming call in three ways: by ringing, by a display on the screen and by the flashing handsfree key d.
You can accept the call by:
¤Pressing the talk key c.
¤Pressing the handsfree key d.
If the handset is in the charging cradle and the Auto Answer function is activated (page 15), the handset will take a call automatically when you lift it out of the cradle.
If the ringtone is intrusive, press the display key §Silence§. You can take the call so long as it is displayed on the screen.
Handsfree operation
In handsfree mode instead of holding the handset to your ear you can put it down e.g. on the table in front of you to allow others to participate in the call.
7