Installation
2. Remove the terminal block cover to expose the terminal block.
Figure 3: Terminal Block
4. Remove TOP nut, star washer, and round washer from each post.
Note:
DO NOT remove last round washer, last nut or internal wiring leads.
5.Attach WHITE wire, round washer, star washer and nut IN THIS ORDER on TOP of ground strap on CENTER post.
6.Attach RED wire, round washer, star washer and nut IN THIS ORDER to LEFT post.
7.Attach BLACK wire, round washer, star washer and nut IN THIS ORDER to RIGHT post.
black
ground strap
white
red
Figure 8: Three Wire Connection
9. Tighten all connections securely and replace terminal block cover.
green ground screw
Figure 10: Completed Three Wire Range Cord Connection
11. Properly secure strain relief. See “Install Strain Relief” on page 6.
English 10
