45
Main menu – functions
If your mobile unit is logged onto more than one base
(DECT systems*), you can set it to a particular base or
"best base" (automatic base changeover).
Setting the base
Press the menu key.
Scroll to ?!'!-!
and confirm.
e.g. If necessary, scroll to the required
base.
Press the display key.
Scroll to <,*,2?!'!Nor
1! ?!'!*)an d confirm.
or Return to the higher-level display.
Activating priority selection
If you have set the mobile unit permanently to a base, you
can also activate <,*,2?!'!.
When <,*,2?!'!Nis activated - indicated by O,
e.g. O-! – the mobile unit searches for the default base
f or 30 seconds after switching it on or leavi ng the radio
range. If this base is not found, the mobile unit automatically
searches for another base.
Setting the base
* see also Note on page 20
<
?!'!-!
9
<
-!
9
<
9
[
Note:
●If you set !--!, the mobile unit is always auto-
matically linked to the base with the best reception.
●If you are located between two systems and the
mobile unit switches continuously, you should set it to
a particular system.