Siemens Hicom cordless EM Approval, Technical data

61

Appendix

The mobile units have been approved by the German Fed-

eral Office of Telecommunication Appro val (BZT). Th ey

comply with the conditions of approval passed by the Fed-

eral Ministry for Post and Telecommunications (BMPT) for

connection to the Hicom cordless EM telephone system.

They can also be registered and operated on the 10xx and

20xx Gigaset base stations.

Standards DECT in accordance with

ETSI, CTR 6, CTR 10, GAP

Ex protection in accordance with

EN 50014 and EN 50020

No. of channels 120 duplex channels

Frequencies 1.88 GHz to 1.90 GHz

Duplex opera-

tion Time duplex with

10 ms frame length each

Channel config-

uration 1728 kHz

Bit rate 1152 kbit / s

Modulation GFSK

Voice encoding 32 kBit/s (ADPCM)

Transmit power 10 mW medium power;

250 mW peak power

Range outdoors approx.300 m

indoors approx.50 m

Convenience mobile unit

Battery life see ”Charging and using the batteries”

page 16

Permitted envi-

ronmental condi-

tions for

operation*

-10 °C to +40 °C

100% relative air humidity

as well as water splashes and jets

(IP 65)

Weight incl. bat-

teries appro x. 165 g

Dimensions

(L x B x H) approx. 160 x 55 x 25 mm

ApprovalTechnical data

* In non-protected environments

Contents

Main s Safety notes + Operating elements, unit parts * Features Additional safety notes for the standard version Additional safety notes for the Ex version Table of contents Page Hicom cordless EM Environmental conditions General operating instructions Radio range Leaving the radio network Fitting the attachment clip Lending/disposing Cleaning the mobile unit Explanation of the display G4> Display keys Function selection via menus (local functions) User guidance, selecting functions Function selection via codes (switching functions) Inserting batteries in the mobile unit Charging and using the batteries Page Page appears in the display with the first logon pr ocedure. -! , for e xample, flashes with the second logon procedure. the main menu Logging mobile units onto a telephone system symbols are dis- played instead of digits. -! you hear the confirmation beep. you hear the confirmation beep Activating/deactivating mobile units Activating/deactivating the keypad lock , Internal dialling the users own mobile phone number appears in the display. the entered digits are displayed the name or the number of the user is displayed the users own mobile unit number appears in the dis- play. K External dialling Answering calls the entered number is dialled Block dialling for internal/external dialling Dialling a stored number the first three stored numbers are displayed is displayed for approx. two seconds. the selected number is dialled Copying a number to the telephone directory Editing a number ),2(* "! for approx. two seconds. Deleting a number is displayed for approx. two seconds. Automatic callback Forwarding calls Consultation during a call Shuttle switching between two users Conference Overview - code functions * * * * * *44+* * Entering letters/characters and digits Page the directory is displayed ;!0),2 Overview directory submenu Storing numbers a "P" is inserted into the phone number. #s<s<.-! the check is initiated. Dialling a number from the telephone directory the first names are displayed Editing/deleting/displaying an entry 4> ''!),!- !'!! is is displayed for approx. 2 seconds Deleting the telephone directory Available memory Overview main menu Activating/deactivating the handset lock DSS number for locked mobile unit Saving a short cut new entry Short cuts Starting a short cut the first names (in alphabetical order) in the short cut list are displayed the active status is indicated in the display until the short cut has been completed. Setting the base 1! ?!'!*) Activating priority selection Setting the base Page Overview settings Settings handset, ringer... >)#!,B*'.(! Changing the base name -! flashes. Base settings Page Overview handset settings Setting Explanation/notes Level Default Overview beeps Beep type Explanation, note Default See page 62 for information about acoustic signals! Beeps keys, battery, range... >)#!C,))# Saving functions under Starting saved functions Deleting default select services Select services ''!),!- !'!! Deactivating the display Changing the mobile unit PIN Setting the language Resetting the mobile unit to the default state Page Before contacting the Service department, you should attempt to rectify any errors yourself: Troubleshooting Caution: The battery compartment must not be opened under any circumstances in an Ex zone. *))!N >!'!-! -! Approval Technical data Acoustic signals Accessories A B C D E F G H I O P Q R S Additional standards: Gigaset active Ex Permitted batteries: Gigaset active Ex 3$0%