Siemens M65 Getting started

Getting started 9

Getting started

The phone must be assembled before you can get started.

SIM card and battery

•Place the SIM card in front of the slot with the contact surface fac-

ing downwards. Then slide the SIM into the holder 1).

•Insert the battery sideways into the phone 2, then press it down- wards 3 until it clicks into place.

Battery cover

•Pull the rubber gasket over the locating lugs 1on the cover, then push it onto the four studs 2 so that it is firmly positioned on the cover.

•Push cover forwards 3 until the locating lugs engage in the open- ings in the phone.

Additional information

Your phone's display is supplied with a protective film. Remove this film slowly before assembling the phone. In rare cases, static discharge may cause discolouration at the edges of the display. However this will disappear within approx. 10 minutes.