10 | Getting started |
Metal bracket
•Slide the metal bracket open until the openings in the metal bracket
and in the cover are directly above each other 1. The hooks 2must engage in the openings on the front of the phone.
•Insert the locking catch into the metal bracket 3and turn it ninety degrees to the right 4to join the metal bracket to the phone.
Seals
•Insert the contacts cover 1 into the connection socket.
•The camera lens and antenna
socket are protected by the lens cap 2. Using the rubber washer 3in its place does not offer better protection (p. 119).
Additional information
Please switch off your phone before removing the battery!
Only 3 V SIM cards are supported. Please contact your service provider if you have an older SIM card.