Getting started | 9 |
Getting started
The phone is packaged in dismantled form and must be
Your phone's display is supplied with a protective film. Remove this film slowly before assembling the phone.
In rare cases, static discharge may cause discolouration at the edges of the display. However, this will disappear within approx. 10 minutes.
Insert SIM card/battery
The service provider supplies you with a SIM card on which all the important data for your line is stored. If the SIM card has been delivered in
•Place the SIM card flat in front of the slot with the contact surface facing downwards. Then push
the SIM card in using gentle pressure 1 (ensure that the chamfered corner is in the correct position).
1
2
3
•To remove the SIM card push the latch downwards 2 and pull out
the SIM card in shown direction 3. Please do not use any tools.
•Insert the battery sideways into the phone 4, then press it downwards 5 until it clicks into position.
45
•To remove the battery, pull it out with the retaining tab on the side.