Siemens MC35 1 Introduction

AT Command Set

MC35_ATC_01_V04.00 Page 10 of 238 02.04.2002

1 Introduction

This document presents the AT Command Set for the Siemens cellular e ngines

MC35 Module

MC35 Terminal

The AT commands detailed in this document are supported by both products. Where diff erences oc-

cur, they are noted in the chapter that refers to the command. In the present version, the only excep-

tions concern these commands:

Table 1: Product specific use of AT commands

AT command MC35 Module MC35 Terminal

AT+CALA, Chapter 4.2 Alarm mode and reminder call

fully applicable

Does not support Alarm mode.

Please ignore any information re-

lating to the subject.

The reminder call can be used as

described.

AT^SSYNC, Chapter 8.37 SYNC pin may be assigned dif-

ferent functions: <mode> 0 or 1.

SYNC pin supports only <mode>=1

(LED status).

AT^SBC, Chapter 8.5 All functions fully applicable Command not appl icable.

MC35 and MC35 Terminal feature basic SIM Application Toolkit (SAT) functionalit y which enables SIM

cards to run additional network based applications, such as value added services, online banking, in-

formation services etc. To give you an idea, Chapter 7 provides a brief overview. In greater detail, the

SAT functions and the required AT commands are described in [4].